The player does have a large effect on both those things. A player that supports the codec will not need server hw accept and hdr conversion as it will direct stream. A big issues is these codecs can cost money. So if the player doesn’t come with it the player needs to pay for it, something plex may be doing for those that purchased their subscription.

Jellyseer is a jellyfin comparable alternative to ombi.

A glass may have a spec that allows it to be filled to the brim. Doesn’t mean it’s a good idea, especially when you want to run up stairs with it.

Your going to spill water everywhere.

People have attached pens to 3d printers and used them to write letters, effectively print. Most consumer 3D printers are useing or based on open source software.

I think the issue is, printers are relatively cheap to buy and replace. So building your own and programming it hasn’t been necessary. Where as 3d printing was completely in accessible before the reprap movement. 3D printing software is open source as it is motivated by people wanting to build their own machines that could build machines. Something you couldn’t easily buy.

A small computer, large capacity ssd and two WiFi interfaces (2x usb dongles, or dongle plus usb).

Small computer could be anything: raspberry pi (or generic and), nuc mini pc or laptop. If you want to use it without a plug you’ll need to add a battery, usb c powered devices could be more convent to power from a battery.

A ssd is better for this use case. Not because it’s faster, but they are more resilient to being knocked about and dropped. They are also much smaller, especially M.2, and aren’t fussy about how they are mounted.

The two WiFi interfaces would allow you to create a WiFi bridge to access the internet through a WiFi network and access your media server. It would need some configuration, you may also need to have the computer act as a router if you want to use multiple devices without reconfiguring.

It may be easier to have your device act as a WiFi hotspot and have the media centre automatically connect to it. This would make it difficult for multiple devices to use it simultaneously, and you could accidentally allow the media centre to do all its updating and downloading over your mobile connection.

This type of thing is going to be expensive and troublesome to configure unless your already experienced with that sort of thing.

I think a better solution, especially if you already have a media server. Is to set your media server for external access.

To get media when you don’t have internet, buy a large capacity flash drive (or external ssd/hdd). When you have access to your media server download all the content you want on to the drive. I think iOS jellyfin can do this without much modification.

Once out of range of your media server. Delete the content you’ve watched on your device (iPad) to free up space. Connect the external drive through the usb port on the iPad, copy over the next lot of content you want to watch. Disconnect and then watch the content.

Jellyfin can download the content, but you may need another app to play it when you don’t have access to the media server.

This approach lets multiple people access a much larger amount of media, effectively simultaneously. It doesn’t require a large amount of often expensive local device storage - you use cheap external storage. It much less expensive if it breaks or gets lost and has very little configuration -if you already have a media server running jellyfin.

Probably not much for people on a self hosting community, but those that want to get away from subscriptions and steal your data as a service cloud providers that might need some reassurance that they’ll have a working system.

Nixos is an os that’s defined by its config stored in .nix files. Everything is defined here all the software and configurations. Two people with the same script will have the exact same os.

Any changes you make that aren’t in the scripts won’t be present when you reboot.

You could maintain a very custom linux distribution (kinda) by just maintaining these config scripts.

So a user wouldn’t need to install all required software and dependencies. They could get a nixos and the self-host config and adjust some settings and have a working system straight after install.

It’s like camping in the garden, in the hopes you’ll reduce your commute.

Yes, I understood that. There are specific OS for Kodi like libreElec, that make it easy to have support for lots of codecs etc. I don’t know if any for specific to Jellyfin, but the Jellyfin App has a better UX than Kodi.

Kodi is a great Linux client. But that’s not what OP wants, the jellyfin app is a nicer UX experience.

That’s just how humans are. The average rating is 7. If it was perfectly even it would be 5. But it isn’t. We are objective or rational when we’re asked to put a number to our personal opinion.

How people rate things is skewed. 5 really means there isn’t anything redeemable about it.

For someone to mark below the midway point it tends to be because they are offended or upset about it. At that point a quality rating isn’t appropriate, it should be 0.

Windows is just shit piled on top of shit and sold as something new. It’s so bloated so they can maintain backwards compatibility. So original code is definitely in Windows 11.

It won’t generate random numbers. It’ll generate random numbers from its training data.

If it’s asked to generate passwords I wouldn’t be surprised if it generated lists of leaked passwords available online.

These models are created from masses of data scraped from the internet. Most of which is unreviewed and unverified. They really don’t want to review and verify it because it’s expensive and much of their data is illegal.

They would have to set it up before leaving. Or have someone in the household change their router settings to enable it and share the details with them.

If you ever look at local WiFi networks in most residential areas you will see 90%+ use the default router supplied by thier isp. Also using the default SSID and password printed on the router. Most wouldn’t even venture into the routers web page to change the settings. So the likelihood someone would configure this is low.

If you don’t already, change your default WiFi SSID and password. It makes it easier to share with visitors, you can use the same ones when you switch routers (saves reconfiguring all devices). It also removes the possiblity of your ISP leaking the SSID and password to anyone. If it’s been printed, then it isn’t encrypted when stored. Many ISPs have lost lots of customers data in breaches, many of which they resit making public.

There is lots of web based guis. These are accessed on a separate device on the same network (or internet). These use very little resources, all the rendering is done on the client web browser.

It’s probably the same amount as before. More phones and tablets haven’t had a big effect on the amount of general purpose computers. There’s devices today like raspberry pi and Arduino that fill the same niche as older general-purpose computers.

Your assume things are different and must be worse. This is a take old as time. Socrates complained about the youth no longer taking the studies as serious as his generation did. The world would have fallen into complete chaos if it were ever true. It’s the conservative myth that things were better and can only get worse.

These kids accessing websites that tell you that a general purpose computer is needed, would have to rely on textbooks and magazines to get the same information in the past. A much bigger barrier, even identifying which ones you need.

People wrote software before there’s was computers for them to grow up with. They’ll be able to develop these skills in university’s, colleges, coding courses or online.

I grew up prior to the app world. My exposure to computing during highschool was word, excel, access and once we used PowerPoint. Nothings changed, people are only taught what the teachers know.

Software engineering does have standards and methods to developing software. These standards and methods are applied in Defence and Aerospace applications. Software engineering was developed or conceived by NATO to manage the increasing complexity of software development.

The big problem is people often confuse software development or programming with software engineering. Calling anyone that programs a software engineer. This isn’t the case. It’s entirely possible to be a software engineer without knowing how to code (but impractical).

All the AI does is match the request to solutions it was trained in.

It just stackoverflow in your ide. It has a little more flexibility in answering and isn’t as corrupted by SEO result when googling the equivalent answer. Its not informed and thinking.

The optimisation problems you are talking about is the process that is used to make AI models in the first place. I think you want an AI to configure optimisation routines for you rather than build the test cases and variables yourself. Or you want some system that implement all the individual components better, but an AI that can optimise the entire thing isn’t coming about soon. It would need to trained on very similar software. In which case you should just use that better software.