https://www.nature.com/articles/s41893-025-01512-0

Yeah, I’m here for a reason. It takes a lot of blocking/filtering too. But the reason I am here is my desire for “algorithmic complacency”. I like to spend some time mentally wandering.

I’m so glad this was algorithmically recommended. Thanks lemmings!

I did not. Foolishly I got rid of my balance board after some years of no use.

If you can find an old working Wii Fit Balance Board you can use it as a very accurate Bluetooth scale.

I have two TP-Link EAP610, one EAP245, and one EAP615-Wall. The Omada controller runs on my home server in an LXC. Three of the units are powered by PoE, and the garage one is meshed in. I needed three in my house because the walls have chicken wire in them which blocks and reflects WiFi. It took some trail and error to get the WAPs in suitable locations. The main one in the basement is under a wall, such that it has line of sight into 5 rooms of the house. I used iPerf to test performance at the edges of each room, until I could get at least 300 Mbit reliably. That was the only way I could ensure that I was getting a direct signal and not a reflection off a wall.

I’m kind of a Linux noob but I found LXC to be much easier to manage than Docker. Some nice resources are TurnKeyLinux images and the helper scripts:

https://community-scripts.github.io/ProxmoxVE/

What about using lxc natively? I would imagine librespeed would run better without two layers of virtual networking.

I update a container by doing a backup, then logging in and running apt upgrade and apt update. Some applications I update manually by downloading and unpacking the installer.

I haven’t noticed any kind of performance issues. The only application I tried which seemed to require Docker was Immich.

I use Emby. It’s similar to Jellyfin, but the Apps get a little more attention to detail. Worth a try, and if you don’t need gpu transcoding you don’t need to pay.

But, if I was still using an Apple TV, I would use Infuse.

Omada software controller handles my wireless access points. HomeBridge lets me control various things from my iPhone, without having to use 5 poorly-made apps.

Put some address numbers to the left and right of your plate. Map out the LPRs in your neighborhood, and post flyers about them so people see.

EFF will pick up the slack.

The root cause is economic. Wealth is being transferred to the billionaires at a growing rate. This causes difficulty for most people. If we were smart we would unify and tax obscene wealth, and everybody would be happy. But instead, those billionaires spend hundreds of millions of dollars stoking the flames of a culture war. They amplify every emotional issue to motivate emotional (outrage/anger/fear) voting. Now instead of liberals pushing progressive tax policy, they just vote for moderate democrats because the only other choice is a fascist. And if it wasn’t that, they’d stoke liberals into a Green Party socialism craziness and vilify it, so that again the sensible choice is moderates.

The real question you should ask is why are most representatives on both sides millionaires? There’s really only a handful of congress members who don’t already have millions in assets. I’ll answer it for you - it’s almost impossible to get elected without a major campaign donation. Rich people fear poor people rising up, so they throw money at measly millionaires to do their bidding and keep their power.

In summary: the rich control 90% of who gets elected on both sides. The rich get whatever they want, because everybody else thinks they need to vote based on a couple issues they saw on TV. The actual candidate doesn’t matter. They’re all billionare’s puppets, who vote on party lines in order to get re-elected. Stir the pot and lose your position.

Seasons 1-7 appear on Tubi. Pretty easy to rip with yt-dlp

Non-tech. I decided to self host first to send media to my TV. I wanted an always-on solid state hard drive computer that didn’t have to do any transcoding. Tried DLNA but Emby just worked better. Jellyfin didn’t have an LG App at the time so I’m still using Emby. Eventually I also asked my poor ARM server with 2 GB of RAM to also run my wireless access points, but the Omada software is a resource hog. So I have a little Intel machine that can do Omada better and also transcoding for Emby on the go. And then I learned about HomeBridge and that’s been great too. I think together the two computers run about 15W of energy I could decommission the ARM one but it does a couple things I haven’t migrated yet. I’ve tried hosting other stuff but those are the main ones used every day.

Emby is a cousin of Jellyfin that supports DVR functionality. I have successfully recorded from IPTV streams, which shouldn’t be too different from a tuner card. The main thing is it needs to load the programming information from somewhere.

I was just thinking about this. Love these videos. Cooling of a solar panel is a good application, as long as it gets cold enough for long enough to re-solidify at night.

An alcohol/NaCl solution with a stabilizer can make an ice pack that freezes colder than water. That could be used to keep ice cream frozen in an ice chest.

It would be cool to have recipes for a few different temperatures. There’s a German company Qool Products that sells PCM temperature elements (ice packs), at a variety of temperatures, to store ice cream up to red wine/cellar temp in their ice chest. With some trial and error I guess we could now make our own!

I would probably do a one-time purchase but I don’t do subscriptions.

Piwigo is more like a shared gallery. Users create album/folders and upload individual photos, which other users can access. Piwigo has poor support for videos and no support for Live Photos.

Photoprism has only a single user for the free tier. It supports Live Photos and videos, and individual photo uploads. It does facial recognition tagging.

Immich supports video/Live Photos, facial recognition, and has multiple users, but it expects a full backup/synchronization (not individual photos). Sharing between users is manual, not automatic or permissions-based like Piwigo. Each user has access only to their own backups or shared albums.

In summary, I think Piwigo is the simplest to set up and use, but it doesn’t do much beyond photos - it’s a simple shared gallery. Photoprism is good and stable, but you have to pay a subscription for multiple user accounts. Immich is rapidly developing, which means things will break, but also it has the most features. My only issue with Immich is that I don’t want to use it as a backup - only as a “best of” shared gallery. While it’s possible with Immich, I would have to maintain an Immich album on my phone, and sync only that, and I would have to set up shares with other users manually.