I wanted to use this on my RPI2 buy I think the CPU is too old 🙃 I to however have a openWRT router and I suppose I can achieve similar functionality with a bit of hacking on the OS.

Thank you for taking the time to write this! Well, first stage of my project (getting openwrt my router) has gone according to plan, and now to strive for the next objective 😏

Thank you for taking the time to answer throughly! I noted your advice and chunked up my goals into “mini-projects”, once I have all the configurations set and all devices connected to the new router. I did check what I bought is a router, not a switch (I find the naming of the device acting as the gateway between the LAN and WAN to be a bit ambigous: switch, router, gateway…).

As for the IDS capability, this is something that would be done by a raspberry pi being fed packets from the router. I don’t know if I will ever undertake that task, but I keep it in mind if I’ll feel adventorous 🙃

(for those wondering: Linux Magazine #279 has a guide on how to accomplish this with a Fritz!Box 7583).

Thank you for all the questions to help me clarify my use case 🙂

At the very basic, I’d like to:

1. achieve better security through segmentation by isolating cloud-connected devices, guest devices from trusted devices.
2. Being able to “pin” a Mac address to an IP, and being able to use internal network name resolution to reach those devices.
3. a blocklist for known ad-domains / malicious domains.

Once the basics are in place, I’d like to elevate my netsec game and implement:

• a high level monitoring capability to seen what devices are communicating with what domains / IPs
• An IDS capability of some sort to be able to detect anomalies in my LAN.

The NAS part is just for convince, it would be nice to have a samba / NFS with my files available when I need them.

Welcome to the deep rabbit hole :-) how much do you know about how computers work? In general, you’re going to need to understand some basic networking and general Linux administration, but if you already have a grasp on that then I’d say you just need to start small (simple service, aim to have a resilience goal with backups and restoration) and other metrics that motivates you. Perhaps you want to learn something new with every service you host? You decide, this is your hobby :-)

Hey, don’t forget unciv :-) it may not look amazing but that game is a very fun 4x to play.

This is a very solid (if not the best) roguelike to play on phone.

I think for matrix to be usable in a homelab setting, Matrix needs to enable a way to handle these huge data storage with prune or something similar.

I found snikket to be quite decent, give it a whirl.

Awesome <3

If you need feedback, testing etc. on this feature, I’m happy to help. Just pm me and I’ll give you my github account.

This is really cool. Happy that you included the comments, as I find them often quite insightful. Look forward to spin this up and try it.

Edit: I know this is really hard to design and implement, but is it possible to bring in certain amount of child comments as-well? E.g., past a certain vote threshold or only X child comments deep. This might be a requirement that want to “move” the social media platform into the RSS feeder, but I want to entertain the idea.

There are so many monitoring tools with various degrees of complicated setup / configuration or the amount of information you get. And honestly, I’ve looked into various tools: checkmk, monit, Prometheus… And realised that I rarely look into that information anyway. Of all “fancy” tools, I liked the ease of Netdata to set up and the amount of information that you get. However, beware that their in the process to make their free / homelad offering worse. I’ve been eyeing beszel and don’t forget CLI based tools that are avaible such as atop, btop, htop or glances.

If you want to delve deeper into the rabbit hole of monitoring, I can recommend you to read this article below: https://matduggan.com/were-all-doing-metrics-wrong/

I’ve tried different approaches with fail2ban, crowdsec, VPNs, etc. What I settled on is to divide the data of my services in two categories: confidential and “I can live with it leaking”.

The ones that host confidential data is behind a VPN and has some basic monitoring on them.

The ones that are out in the public are behind a WAF from cloudflare with pretty restrictive rules.

Yes, cloudflare suck etc., but the value of stopping potential attacks before they reach your services is hard to match.

Just keep in mind: you need layers of different security measures to protect your services (such as backups, control of network traffic, monitoring and detection, and so on).

I know that you get this question a lot, but why would one use this over sterlingPDF?

I like this thread :-)

I have just checked off a long standing item in my backlog: implementing OIDC on at least two apps. I’ve used a remote keycloak instance for authention for my household and so far so good. Now I’ll try to understand the configurations a little better before take on other items on my backlog.

I found the UI to be horrendous, and managing tags was very painful. During the time I was paying for the cloud-service, there wasn’t any noticable development of the web-app, so I stopped using it. Mind you, this was pre-pandemic and things might have changed since then.

I’m really fond of readeck. After being dissapointed with Pocket and Wallabag, I went with omnivore until they pulled a skiff. Out of all the FOSS read-it-later solutions - it was a very even tie between Shiori and readeck, and I went with the latter since it supports highlights.

I was also eyeing this, but wanted to use another provider than openAI or ollama. So I’ll wait until that’s implemented.

Never heard of go-proxy, seems like it will fit my needs well as I only use Caddy for rev-proxying.

Thanks for the awesome blog!

Its not about contributing to the map data. There’s quite few quality issues with organic maps, from small things in the UI to how it calculates the navigation from A to B. I want to like organic maps, but its still far from usable for me. I do however regularly contribute to OSM - mainly thanks to streetcomplete.