I got the lifetime pass 5 years ago. I’ve switched to JF because of the disappointment so far about a year ago.

JF is exactly what I wanted and needed plex to be, and everything added since is a worsened product. The lifetime pass was an attempt at getting the peace of mind of “then you just have it”. If anything, only FOSS can give that.

I had mixed feelings about the whole Ondsel thing. And, please correct me if I’m wrong.

Most of the significant features in 1.0, that supposedly came from Ondsel, are things that I’ve been using for perhaps 3 years now, with a fairly well known branch of FreeCAD called Linkstage3 by a user that goes by RealThunder.

I don’t know how much he was involved in Ondsel, or the merging of those features into FreeCAD, but it sure looked like a whole lot of great work wasn’t credited to mind boggling amount of work by one person.

I still use the Linkstage3 branch, because it has a lot more features still, than what was present in the 1.0 pre-release i tried some months ago. Maybe things have changed since then.

Sure, but, what does that have to do with the AI answer? Wait… Are you an AI?

I believe that a significant factor for this can be attributed to mental development and maturity of boys lagging behind that of girls of the same age, during formative years. And, please read on, if you assume my argument is “boys dumb, conservatives dumb. Q.E.D.”

The second factor is an education system where this offset in mental development/maturity is further confounded. Boys don’t typically do as well, because sitting idle and being a “good boy”, is more challenging. This leads to a path for boys to start working earlier, while girls get higher degrees. (I assume the trends for higher education by gender, to be similar, if not, then that can falsify this hypothesis).

What a person then observes they get from society, vs what you pay in terms of taxes, is skewed between these two groups, and highly correlated with gender.

If this hypothesis has any validity to to it, then one could argue that a way to mitigate this is by correcting the negative causes. Where the fundamental root cause might be improved by revisiting how education is failing boys in particular.

The challenge with this is that if the conservative parties’ policies are driven by what can make more people vote conservative, then this will be a negative feedback loop. The worse you make it for a certain group of people that vote for you, the more that group is willing to vote for you.

Are you thinking about daylight savings time? I’d agree there, but timezones absolutely make sense, and we’ve always used some version of it. “See you at noon” has a sort of built in timezone, as does sunrise and sunset. We (all human societies) relate hours to the day in a similar, albeit more regular way. If you did away with timezones, you’d replace a minor inconvenience with a monstrous one. Everyone uses what, GMT? Naah

There are two common types of laser printers. Those that have special paper that react to heat, such as receipt printers, would fit the description.

The other laser printers… Hm, I don’t think your description is accurate either. It’s more that the laser electrically charges ink particles so that they jump on to a separate roller that gets rolled on to the paper.

I’m no expert though.

In the EU, it sort of isn’t.

Takes a long time to write a proper response for all the GDPR stuff. The responses surprisingly don’t change all that much whether or not I do, so I might as well save me the trouble.

Absolutely. Those you suggest there are good examples.

Good enough that, instead of “is/isn’t” programming language, it would be more a “ah, so, how do you define that then?”. Now that I’ve had some sleep, one could argue that I could have been nicer and suggested that approach for HTML as well. After all, it’s just words that mean stuff, and transfer a concept between people, that translate to the same (ish) idea. The moment the latter isn’t the case, it’s no longer very useful for the former.

Most disagreements, I find, are just cases of different understandings. Discussions worth having is when both are correct but different, and both want to figure out why they differ. So, on second thought, I think I was appropriately rude ^_

Both LaTeX and roff are Turing complete, but they are also DSLs with a somewhat narrow “domain”. Sounds exactly right that these blur the lines between what is/isn’t. You could even argue that claiming one or the other is just one way to express how you understand that difference.

That’s such a weird point to make. Is it because to you, it seems like the line drawn is arbitrary? I cannot imagine any other reason. Certain words just mean certain things.

Markup languages are exactly as much “programming” as you marking a word and hitting “bold”. Which is to say, nothing at all. People are wrong all the time, and I have a very limited amount of fucks to give when it happens.

As for Scratch, it is a programming language. So, why would you think it’s a logical next step for me to say otherwise? Next, you’ll say something remarkably dumb in response. Resist the temptation, and do something more productive.

Not really. If so, you might as well consider the stuff you can use to format a comment here on lemmy, as “programming”. That’s conceptually more similar to HTML as what programming actually is.

quote

some title

Ooo hyperlink

Etc.

First thing you mention is such a fun and useful exercise. But as you point out, way overkill. Might even be dangerous to expose it. I got mine to 20kb on top of busybox.

There is something that tickles the right spots when a complete container image significantly smaller than the average js payload in “modern” websites.

With just little bit of formatting, it would communicate the information infinitely better. Why don’t people make the minimal effort, once, when not doing leads to each and everyone having to figure out what the fuck it’s actually trying to say.

Apologies. I’m grumpy after a three hour meeting.

If you’re actually vetting PKGBUILD, I don’t think there is a single one I’ve installed that doesn’t download some blob. There is no way of knowing if it’s OK, unless you also sift through that. I don’t think anyone does. I certainly don’t.

I don’t think the Unix philosophy of having lots of small tools that do one thing and do it well that you compose together has ever been achieved

Why do you think this might be the case? It’s not remotely accurate, which suggests that you must understand it very differently than I do. To some extent, I am curious.

I’ll give you a recent example. Which is just from yesterday. I had a use case where some program had a memory leak, which would eventually lead to the system running out. So, I “built a program that would monitor this and kill the process that used the most memory”. I don’t know how complicated this is in windows and PS, but it took about 2 minutes in Linux, and it very much leverages the Unix philosophy.

Looks something like this:

get_current_available_memory_mb() {
    cat /proc/meminfo | grep MemAvailable | grep -oP '\d*' | xargs printf "%d / 1024  \n" | bc
}

Functionality based on putting together very small pieces that do their things well.

• /proc/meminfo is a file pipe that gives you access to information related to memory usage.
• cat just outputs data from a file or a named pipe, here the latter
• grep lets you filter stuff. First time the relevant line. Then again to strip out the number with a regex.
• xargs does one thing well, and lets you pass that on to another command as arguments, instead of stdin.
• printf formats the output, here to express the numerical operation of dividing the value by 1024 as “[number] / 1024”
• bc evaluates simple mathematical operations expressed in text

Result: 1 file pipe and 5 simple utilities, and you get the relevant data.

The PID of the process using the most memory you can get with something like:

ps aux --sort=-%mem | head -n2 | tail -n1 | awk '{print $2}'

Same sort of breakdown: ps gives you access to process information, and handles sorting by memory usage. head -n2 just keeps the first two lines, but the first one is a header so tail -n1 keeps the second line. awk is used here to only output the second column value. And, you get the relevant data. Also, with simple tools that leverage the Unix philosophy.

You then check if the available memory is below some threshold, and send a kill signal to the process if it does. The Unix way of thinking also stops you from adding the infinite loop in the script. You simply stop at making it do that one thing. That is, 1. check remaining memory. 2. if lower than X, kill PID". Let’s call this “foo.sh”.

You get the “monitoring” aspect by just calling it with watch. Something like watch -n 2 -- ./foo.sh.

And there you go. Every two seconds, it checks available free memory, and saves my system from freezing up. It took me 10 times longer to write this reply, than to write the initial script.

If memory serves me correctly, PS also supports piping, so I would assume you could do similar things. Would be weird not to, given how powerful it is.

I could give you an endless list of examples. This isn’t so much a case of “has ever been achieved”, but… a fundamental concept, in use, all the time, by at least a dozen people. A dozen!

Also yesterday, or it might have been Saturday. To give you another example, I scratched different itch by setting up a script that monitors the clipboard for changes, if it changes, and now matches a YouTube URL, it opens that URL in FreeTube. So… with that running, I can copy a YouTube URL, from anywhere, and that program will immediately pop up and play the video. That too, took about 2 minutes to do, and was also built using simple tools that do one thing, and one thing well. If you wanted it to also keep a local copy of that video somewhere, it wouldn’t be more effort than the 10 seconds it takes to also send that URL to yt-dlp. One tool, that does that one thing well. Want to also notify you when that download is complete? Just add a line with notify-send "Done with the thing". What about the first example, if you want to get a OS level notification that it killed the process? Just add a line to notify-send, same tool that does that same one thing well.

None of this takes much effort once you get into it, because the basic tools are all the same, and they don’t change much. The whole workflow is also extremely iterative. In the first example, you just cat meminfo. Then you read it, and identify the relevant line, so you add grep to filter out that line, and run the command again. It’s now a line containing the value, so you add another grep to filter it out the number, and again, run it. “Checks out”. So, you pipe that to printf, and you run it. If you fuck something up, no biggie, you just change it and run it again until that little step matches your expectations, and you move on.

No complaints from me. Maybe if I had to use it. The thing that strikes me as particularly noisy is what seems to be either case insensitive commands and flags, or case sensitive and using Pascal-Case for both commands and flags. Which would be my least preferred option.

Thanks for the info! Is a correct assumption that this is a “yes”, to my question?

I’m curious. Does anyone like PowerShell, and the syntax you end up with?

By how some teams operate, and some developers think, there is certainly cases where the “engineering” aspect is hard to find.

Processes can make their own processes. If you know of such a secondary process, you might still want to terminate the one at the top.

Something like that?

It’s fascinating how some SPAs come about. Often consultancies who win some bid to implement X features. Since “good user experience” is hard to quantify/specify, it ends up being a horrible end result.

Zalaris is one such that I’m in complete awe of. Set up user flows that are expected to take 30 minutes to complete. Yet, don’t keep track of that state/progress withing your own SPA. Click the wrong tab within that SPA, and state is reset.

It’s, just fascinating.